4.2.1

• GMAC not displayed with FMR algorithms
• Support for round-robin (RR) algorithm
• DHCP requests in high availability deployments
• System module instability

• GRE tunnel provisioning
• Updated DPI library
• View DPI sessions by subnet
• View configuration changes by user
• SNMP traps for configuration changes
• Host discovery
• Logging improvements
• CORE series support for VLANs

4.1.1

• Security enhancements
• FQDN resolution
• RADIUS authentication
• Active Directory and LDAP access
• SitePathMTPX enhancements
• Troubleshooting information
• DHCP configuration
• Restrictions on sensitive information
• Bypass ports
• End-of-sale notification
• New documentation introduced

4.0.9

• Custom banners
• Support for multiple DHCP links in the same LAN
• Legacy user account migration

4.0.8

• Continual evaluation of Flex Multipath Routing links
• New applications added for deep packet inspection (DPI)
• Link configuration supported through Elfiq Central
• Requirements for hostname length
• Password security enhancements
• Dynamic discovery of MAC addresses of hosts with a /32 IP address
• Correction of a MAC flapping issue
• New documentation introduced and old documentation deprecated

4.0.7

• New application categories for deep packet inspection (DPI)
• Support for HTTP strict transport security
• SSL compression disabled
• Correction to SSL tunnel logs
• Failover for Flex Multipath Routing sessions
• Correction to password length enforcement

4.0.6

• Configurable minimum password length
• SSH ciphers and algorithms disabled
• TLS version 1 disabled
• Configurable Virtual Router (VRT) interfaces
• DHCP services on the Virtual Router (VRT) module
• Specify multiple QoS queues with Priomap
• Support for multiple logging servers
• New branding on the Link Balancer's web-based interface
• New documentation released

4.0.5

• Corrected latency issues in the failover module (FOVE)
• Deep Packet Inspection (DPI) enabled for ATLAS licenses

4.0.4

• ICV Action Groups Supported with Priomap and Deep Packet Inspection
• SD-WAN Algorithm Support in Priomap
• SIM Card Management in EDGE Series Units
• License Package Messages
• License Expiry

4.0.3

• Firewall Filtering Based on Access Lists
• Replacement for LBX2600
• Flex Multipath Routing: Path Flapping Enhancements
• SNMP Enhancements
• Special Characters for Geolink Local Authentication Password
• Display of Network Interfaces
• Display of License Information
• GMAC Error Message

4.0.1 All builds

• Support EOS 4 for new models: EDGE and CORE
• Support EOS 3 models (for compatibility)
• Support Atlas subscription
• Support licensing for Firewall feature for EOS 3
• Support licensing for Stream VPN feature for EOS 3
• Activation Code concept: EOS 4 will allow unit registration on Elfiq Central by ElfiqID

4.0.1.180430

VFI0:

• Max Number of DPI acl in /out and action group display
• DPI memory consumption optimized

3.8.19

General:

• Gmac flapping settings
• New command to display EDP details
• Same Bin file for failover or single unit

3.8.19.180306

VFI0:

• Neighbour engine display for PPPOX improvement
• Virtual Router VRT display for a broker

3.8.18

General:

• Parsing issue on sh probe report dpi output
• Intel Meltdown and spectre issue

3.8.18.180124

VFI0:

• Firewall data flow issue under VFI1 for FMR algorithms

3.8.17 All builds

General:

• Various fixes

3.8.17.180110

Central:

• Feedback required from the unit when an invalid license is detected

FOVE:

• Units unexpected reboots after firmware update

3.8.16 All builds

General:

• Support for LTE Quectel EC25
• Various fixes

3.8.16.171219

SYST:

• USB CELL E397 signal fluctuates between NO SIGNAL TO EXCELLENT for an unknown reason

VFI0:

• Debug all off not apply to debug: geo2, spath2, spath3
• Rewinding the time may cause SID not to be cleaned and prevent GUI/API/Central from login

3.8.15 All builds

General:

• Various fixes

3.8.15.171122

VFI0:

• Various GUI improvements
• Fixed an issue with FMR route 0.0.0.0/0
• Fixed an issue for various output commands

FOVE:

• Fixed an issue to Prevent Syncro on Policy Geotag
• Fixed an issue for Syncro related to sh peer stats

Central:

• GUI Remote Access
• CLI Remote Access

Capture:

• Application Report

3.8.7 All builds

General:

Basic stateful firewall

3.8.7.170609

VFI0:

• Fixed an issue where AES256-ne1 encryption may not work with different firmware.

3.8.6 All builds

General:

• GeoLink connection XMLAPI v1.
• TAG load balancing based on DPI signatures.
• Updated AppOptimizer.

3.8.6.170529

SYST:

• Changed the bonding hashing algorithm to L2/L3

VFI0

• Various GUI improvements
• Fixed a display issue in sh probe report for top In/Out values
• Fixed an issue with route pref (route ip)
• Fixed a parsing issue when doing a sh arp
• Fixed an issue where shunning prevents gmac polling

Web

• Removed auto updating in firmware upgrade
• Various gui improvements

3.8.5 All builds

General:

• FOPFA algorithm support for FMR
• Ability to put an FMR path administratively down
• FMR path link flap detection
• Forward and backward compatibility of connection server setup between 3.8.4 and 3.8.5
• Default mgmt ip address is set to DHCP
• Enable live changes on TAG sessions
• Ability to provide to customers md5 checksum for releases
• Username uppercase support in CLI and the GUI
• Improved accuracy of untrasurf signature classification
• Enhanced the way session statistics are displayed
• GUI support for the LBX1200

3.8.5.170303

FOVE:

• Fixed an issue where a reboot was needed to enable a VIP

Web:

• Various GUI fixes
• Fixed an issue where the GUI reports a unit is “unlicensed” when in fact the license is good