---
title: "SC//Connect™ Edge E-40 LTE Modem Install Guide"
id: "adaptiv-edge-e-40-lte-modem-install-guide"
project: "SC//Connect™ | OS v8.5"
url: "https://docs.scalecomputing.com/articles/sc-connect-os-v8-5/adaptiv-edge-e-40-lte-modem-install-guide"
updated: 2026-11-19T17:09:07Z
---

# SC//Connect™ Edge E\-40 LTE Modem Install Guide

# 

This Install Guide outlines the step-by-step instructions to install an LTE modem inside [Edge E-40](/smart/project-e40/adaptiv-edge-e-40-install-guide) (referred to as E-40).

## **Package Components**

| The following components of LTE modem are shipped with E-40. Please contact Supportmailto:support@adaptiv-networks.com?subject=Missing%20package%20contents:%20E40%20LTE%20Modem to notify the missing components.<br><ul style="text-align: left;"><li>Mini PCIe LTE Kit – LTE modem x 1</li><li>Antenna x 2</li><li>Antenna cables x 2</li><li>Antenna cable nuts x 2</li><li>Washers x 2</li><li>fitting screw x 1<br><a href="/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/LTE%20Modem%20Kit.png" target="_blank" style="color: #2c72ff; text-decoration: underline;"><img src="/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/LTE%20Modem%20Kit.png" alt="" style="border: 0px; width: 100%; height: auto; max-width: 290px;" loading="lazy"></a><br></li></ul> |
| --- |

## **Safety**

All standard electronic safety instructions apply.

| The installation of the LTE modem must be performed in a way that protects the integrity of the E-40 internal electronic components. We recommend that the individual performing the installation of modem wear a grounded ESD strap. Please make sure that working surface is grounded. Use a Phillips screwdriver to remove and put back the E-40 components. |
| --- |

1. First, power off the E-40, disconnect the power supply to the device and remove all cables connected to the network interfaces.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step1.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step1.jpg)
2. Flip the device such that the faceplate is facing up. Using a Phillips screwdriver, remove the screw from the faceplate and slide it.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%203.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%203.jpg)
3. Again gently flip the device such that the electronic circuit board is facing up.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%204.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%204.jpg)
4. The electronic circuit board is attached to the clamshell with two pre-fitted stands. To separate it, gently lift the front of the board from two stands at an angle. Now, carefully pull the circuit board away from the clamshell freeing the opposite side from the interfaces and other cutouts.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%205.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%205.jpg)
5. Place the device clamshell and electronic circuit board apart.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%206.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%206.jpg)
6. On the front side of the E40 device, identify the two cutouts for the LTE antenna cable. Using the screwdriver, push the cutouts back and forth and remove them.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%207.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%207.jpg)
7. Now, insert an antenna cable through each cutout such that the threaded bolt is facing the front. 
Insert the washers in the front of the threaded bolts and then tighten the nuts securely (provided in the LTE kit) to the threaded bolts of the cable, ensuring the cables are tightly held in place.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%209.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%209.jpg)
8. Attach and tighten the antennas from the LTE kit to each of the threaded bolts.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2010.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2010.jpg)
9. Now, locate the SATADOM disk on the electronic circuit board. There is a PCIe slot beneath the disk where the LTE modem will fit.

    | ![Note](/resources/Storage/sc-connect-os-v8-5/project-adaptiv-cloud-orchestrator-v4-0/Icon_Note%20Box.png) | Please note that the SATADOM disk is permanently glued to the circuit board and externally powered by the black and red straight wires. |
    | --- | --- |

[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2011.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2011.jpg)
10. Carefully place the LTE modem under the SATADOM disk and the power cable and then gently insert it into the PCIe adapter slot at an angle. This will slightly lift the LTE modem from the circuit board from the opposite end of the PCIe adapter. 
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2012.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2012.jpg)
11. Gently push the LTE modem down and tighten it to the circuit board with the fitting screw provided in the LTE kit.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2013.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2013.jpg)
12. Now, assemble the electronic board to the clamshell by following the steps below. The assembled board should resemble the image in step 3. 
    1. Gently insert the electronic circuit back into the device clamshell ensuring that the circuit board is placed below the antennas attached to the clamshell.
    2. Guide the antenna cables on top of the circuit board.
    3. Carefully guide the power and interface adaptors to a snug fit to the clamshell.
    4. Seat and fit the circuit board on the two stands.
13. Next, align the loose ends of the antenna cable ends into the LTE modem cable adaptors. Snap-fit one end into the adaptor labelled as **MAIN**and the other into the adaptor labelled as **DIV**. Please do not fit any cable into the adaptor named **GNSS**.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2015.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2015.jpg)
14. Now, on the electronic circuit board, slide the SIM tray to the **open** position and partially lift the top tray. Insert the mini-SIM such that the notch point of the SIM is positioned at the left bottom side of the tray.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2016.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2016.jpg)
15. Push the tray down to close it and then slide it back to the **lock** position.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2017.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2017.jpg)
16. Gently place the wires of the antenna cables in the center of the circuit board such that they stay in place when the clamshell closes.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2018.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2018.jpg)
17. Next, slide back the faceplate to close the electronic circuit board and complete the assembly by tightening the screw on the faceplate.
[![](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2020.jpg)](/resources/Storage/sc-connect-os-v8-5/E40%20LTE%20Modem/Step%2020.jpg)