The ValeroPay+ tab displays the status of the ValeroPay+ Connection Service application running on the SC//AcuVigil™ edge security device (ESD). ValeroPay+ enables secure payment transactions between the point of sale and ValeroPay+ authorization servers. Use this tab to verify firewall rules, check FQDN resolution, confirm registered devices, and configure the app mode.
The tab shows the application's firewall rules, mode, endpoint resolution, registered devices, and settings for this site. For an overview of the application, see ValeroPay+.
Application description: The ValeroPay+ Connection Service enables secure payment transactions between your point of sale (POS) and the ValeroPay+ authorization servers.
Supported ESD models: MG3, SG1v1, SG2v1
Layout
The ValeroPay+ tab has a standard app header and two sub-views: Status and Settings. The default sub-view is Status.
Header
| Element | Description |
|---|---|
| App icon | ValeroPay+ app icon. Decorative. |
| ValeroPay+ | App name / block title. |
| Subtitle | "The ValeroPay+ Connection Service enables secure payment transactions..." Static descriptor. |
| Version | Package version string (for example, Ver.R56Cv9). |
| Status | Link. Switches to the Status sub-view. |
| Settings | Link. Switches to the Settings sub-view. |
Status sub-view
The default sub-view. Contains five sections: Firewall rules, a mode indicator, FQDNs, Registered Devices, and POS configuration instructions.
Firewall rules table
A table of iptables FORWARD rules managed by the ValeroPay+ application. Read-only. Documents the rules that permit POS devices to reach ValeroPay+ authorization endpoints on TCP ports 443, 5000, and 9000.
| Column | Description |
|---|---|
| Firewall | The iptables chain: FORWARD. |
| Chain | Internal chain name. |
| Packets | Count of packets matched by this rule since last reset. |
| Bytes | Count of bytes matched by this rule since last reset. |
| Target | Rule action: ACCEPT. |
| Protocol | Network protocol: TCP. |
| In | Incoming interface filter. * means any. |
| Out | Outgoing interface filter. * means any. |
| Source | Source IP address (registered POS device IP). |
| Destination | Destination IP address or IP set (match-set valero.petrozone.com dst). |
| Notes | Additional match criteria: multiport dports 443,5000 or tcp dpt:9000. |
Mode indicator
Mode: <mode>
Options: Production or Test. Controls which ValeroPay+ endpoint the POS communicates with.
FQDNs table
| Column | Description |
|---|---|
| FQDN | DNS name for the ValeroPay+ authorization endpoint (for example, valero.petrozone.com). |
| Addresses | Currently resolved IP addresses. |
A status line: fqdnd running: Yes confirms the FQDN daemon is operational.
Registered devices table
Lists POS devices automatically registered to this application based on Device Type in the Devices tab.
| Column | Description |
|---|---|
| Name | Device name as registered in Device Manager. |
| Device Type | The device type classification (for example, CommanderNICA, PassportEPS). |
| IP Address | Current IP address of the registered device. |
A note below the table:
Registered devices are automatically assigned using the Device Type setting under the device registration tab. Supported device types are: Commander, CommanderNICA, Fiscal Site Controller, Passport, PassportEPS, RadiantEPC, Radiant Site Controller. |
POS configuration instructions
A static note at the bottom of the Status sub-view:
POS Configuration Information: The point of sale should be configured to send mobile payment traffic to |
Settings sub-view
Note: Scale Computing manages these settings as part of the managed service. You can view them here. To request a change, contact Scale Computing Support: open a ticket in the SC//AcuVigil dashboard, email team@scalecomputing.com, or call (512) 687-7401. |
Loads the first time you click Settings. Contains one configurable field and a submit button.
| Field | Type | Options | Description |
|---|---|---|---|
| Mode | Dropdown | Production, Test |
Controls which ValeroPay+ endpoint the app routes to. Production routes to live authorization servers; Test routes to the ValeroPay+ test environment. |
| Update Settings | Button | — | Submits the settings form. Pushes new configuration to the ESD. |
Note: A settings change applies to the live site right away. |
What to look for
- Mode = Production on a live site — confirm before troubleshooting.
fqdnd running: Yes— ifNo, the app cannot resolve ValeroPay+ endpoints.- Registered Devices populated — if empty on a Valero site, check Device Types in the Devices tab.
- Packets > 0 on FORWARD rules — confirms ValeroPay+ traffic is flowing.