The Scale Computing™ SG1v1 is the first SG-generation edge security device (ESD). It's the site's firewall and gateway, and it connects the site to SC//AcuVigil™. The SG2v1 is the current SG model.
Identify an SG1v1
On the Locations page, an SG1v1 site's tile shows SG 010… or SG 011…. An SG2v1 shows SG 03….
Network ports
| Port | Use |
|---|---|
| WAN | The primary internet connection. |
| AUX | A second port that can be set up as a LAN segment or as a second internet connection. |
| LAN | The site's local network. Devices connect through a switch attached to this port, with network segments carried as VLANs. |
All three are gigabit Ethernet ports.
Status lights
| LED | Meaning |
|---|---|
| PWR | The device has power. |
| CLOUD | On: the ESD is reporting to SC//AcuVigil. Off: its last attempt to report failed. Blinking: the ESD couldn't set its clock from the internet. |
| SEC | On: at least one VPN tunnel is up. Off: no VPN tunnel is up. |
| DIAG | On while the ESD is writing its configuration to storage. |
Applications
The SG1v1 and SG2v1 run the same software platform, so they support the same applications. Each application's page lists the models it supports.